4-point and 12-point type are available
Meet the industrial needs with its high reliability
Stable operation and high reliability against disturbance noise
Specifications(Transmitter)
| Model No. | BRC-G24T | BRC-G44T |
| Kind | 4-point transmitter | |
| Power source | Alkaline cell 4 pcs | |
| Battery life : approx.9 hours under continuous use | ||
| Power switch and automatic power-off function are provided(It will be off if no key input for 30sec.) | ||
| Projecting element | Infra-red LED | |
| Directional angle | Full angle 30° | |
| Transmission distance | 10m | 20m |
| Transmission point | 4 points | |
| Transmission method | Transmitted by transmission key(1 to 4), Double key-in is also available by changeover switch | |
| Transmission check | Electronic buzzer(Ringing during transmitting) | |
| Case | ABS resin(Handling part : Polyester film) | |
| Weight | Approx. 120g | |
Specifications(Transmitter)
| Model No. | BRC-G2BT | BRC-G4BT |
| Kind | 12-point transmitter | |
| Power source | Alkaline cell 4 pcs Battery life : approx.9 hours under continuous use Power switch and automatic power-off function are provided(It will be off if no key input for 30sec.) | |
| Projecting element | Infra-red LED | |
| Directional angle | Full angle 30° | |
| Transmission distance | 10m | 20m |
| Transmission point | 12 points | |
| Transmission method | Transmitted by transmission key(1 to 12), Double key-in is also available by changeover switch | |
| Transmission check | LED(Lighting during transmitting) | |
| Case | ABS resin(Handling part : Polyester film) | |
| Weight | Approx. 200g | |
Specifications(Receiver)
| Model No. | BRC-G2AR | BRC-G2BR | BRC-H2AR | BRC-H2BR |
| Kinds | 4 points | 12 points | 4 points | 12 points |
| HEAD-ON | FRONT-ON | |||
| Power source | 24VDC(±20%, ripple 10% or less) | |||
| Reception element | Photo-diode | |||
| Directional angle | 50°for vertical and 90°for horizontal(Full angle) | |||
| Reception method | FSK modulation, output is effective when reverse code corresponds | |||
| F number registration | Set by transmitter | |||
| Output | Data output : 4 pcs(BRC-G2AR, BRC-H2AR), 12 pcs(BRC-G2BR, BRC-H2BR), strobe : 1 pcs, photo-coupler isolation, open-collector output(Max.35V, 50mA, residual voltage Max. 1.5V) Note) It executes only when registered F No. code would coincide receiving F No.code. | |||
| Connection | Cable with connector(2m long) | |||
| Ambient illuminance | 10,000lx or less(Fluorescent lamp, mercury lamp) | |||
| Ambient temperature | -10 degrees C to +50 degrees C | |||
| Ambient humidity | 45 to 85%RH | |||
| Protective structure | IP66(IEC standard) | |||
Note) While working automatic power-off function and under automatically power source would be off, even if power switch is repeated with ON→OFF→ON, there is no display on LCD.
In case that, press any keys(1 to 4) after putting power source on.
Turn to the normal mode and it is possible to transmit.
| Colors | Pin No. | Functions |
| Black | 1 | Power 0V |
| Brown | 2 | Power +V |
| Red | 3 | OUT4 |
| Orange | 4 | OUT3 |
| White/yellow | 5 | OUT2 |
| Yellow | 6 | OUT1 |
| White/blue | 7 | – |
| Green | 8 | – |
| Blue | 9 | – |
| Purple | 10 | – |
| Gray | 11 | COM |
| White | 12 | Strobe |
| Yellow/green | 13 | – |
| Yellow/red | 14 | – |
| Yellow/black | 15 | – |
| Shield | Shield | |
Note) Don`t use attached connector as relay terminal.
| Connector (1) | Connector (2) | |||||
| Colors | Pin No. | Functions | Colors | Pin No. | Functions | |
| Pale blue | 1 | Power 0V | Green | 1 | Strobe* | |
| Pink | 2 | Power +V | Green/black | 2 | OUT12 | |
| White | 3 | OUT8 | Blue | 3 | OUT11 | |
| White/black | 4 | OUT7 | Blue/black | 4 | OUT10 | |
| Brown | 5 | OUT6 | Purple | 5 | OUT9 | |
| Brown/black | 6 | OUT5 | Purple/black | 6 | – | |
| Red | 7 | OUT4 | Gray | 7 | – | |
| Red/black | 8 | OUT3 | Gray/black | 8 | – | |
| Orange | 9 | OUT2 | Pink/black | 9 | – | |
| Orange/black | 10 | OUT1 | Pale blue/black | 10 | – | |
| Yellow | 11 | COM | Shield | Shield | ||
| Yellow/black | 12 | Strobe* | ||||
* It is short-circuited inside. ON when data would be fixed.
Note) Don’t use attached connector as relay terminal.
