Data transfer checker can check the interlocking on SEMI E84 beforehand !
You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles
| BNC-HB1 Head | Model No. | BNC-HB1(with cable 300mm) |
| Direction | SIDE-ON | |
| Transmission distance | 300mm | |
| EPK-BNC1 | Model No. | EPK-BNC1 |
| Power source | Built-in rechargeable battery(Charging from AC Adaptor) | |
| Battery life | Approx. 4 hours(When continuous use) | |
| Charging time | Approx. 16 hours | |
| Cable for BNC-HB1 | 300mm EIA-574(RS-232C 9 pins connector)*1 | |
| BNC-HB1 Application software *2 | Hokuyo Data Flex SFOC | Communication data(Logging data) is read out from DMG series |
| Hokuyo Data Flex RIS | It is possible to make data communication as imaginary UTV(AGV, RGV, OHT etc.) or fixed passive equipments under automatic transportation system. | |
*1 Cable length between BNC-HB1 Head and PC should be within 6m.
*2 Ask about the details of specifications.
