PD-10M/8NM

By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:

Analog output in proportion to distance
Two comparator outputs within any distance

Overview

-> This sensor is an optical distance sensor with infrared ray.
-> This sensor provides comparator output(2 output) that can set optional distance value and alarm output that executes at the out of detectable area.
-> This sensor provides light-emission stop output for preventing interference.

Specifications

PD-10M/PD-10M2

Model No.		PD-10M	PD-10M2
Power source		24VDC(±10%, ripple 10% or less)
Current consumption		125mA or less
Detecting distance		0.2 to 10m(when using specified reflector)
Detectable objects		Plastic reflector with φ100mm(specified reflector)*1
Repeatability		±100mm
Absolute accuracy		±200mm
Hysteresis		300mm
Resolution		40mm
Output	Distance analog output	0 to 10V(Output impedance 100Ω)	10 to 0V(Output impedance 100Ω)
	Alarm output	NPN open-collector output(30VDC, 50mA or less), ON when normal operation/OFF when it is out of detection area or light-reception level is less than rated value
	Comparator output(OUT 1,2)	NPN open-collector output(30VDC, 50mA or less), OFF when it is within detection distance
Input		Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
Lamps		Power lamp(Green LED) : Lights up when putting power source on Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF Comparator output lamp(Orange) : Lights up when it is within detection distance
Directional angle		±2.5°
Response time		50msec or less^*2
Connection		Cable 1m long
Ambient illuminance		Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
Ambient temperature/humidity		-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
Vibration resistance		10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
Impact resistance		490m/s² Each 10 time in X, Y and Z directions
Case		Polycarbonate
Weight		Sensor : approx. 200g, RRP-100 : approx. 65g

*1 Reflection sheet is available, too. Ask us.
*2 It doesn`t measure during 200msec after putting power source on.

PD-8NM1

Model No.		PD-8NM1
Power source		24VDC(±10%, ripple 10% or less)
Current consumption		125mA or less
Detecting distance		0.2 to 8m(when using 2 pcs of specified reflector)
Detectable objects		2 pcs of plastic reflector with 80mm□(specified reflector)
Repeatability		±100mm
Absolute accuracy		±200mm(at 5m or less), ±300mm(at 5m or more)
Hysteresis		300mm
Resolution		40mm
Output	Distance analog output	0 to 10V(Output impedance 100Ω)
	Comparator output(OUT 1,2,3)	NPN open-collector output(30VDC, 50mA), OFF when it is within detection distance
Input		Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
Lamps		Power lamp(Green LED) : Lights up when putting power source on Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF Comparator output lamp(Orange) : Lights up when it is within detection distance
Directional angle		±2.5°
Response time		50msec or less
Connection		Cable 1m long
Ambient illuminance		Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
Ambient temperature/humidity		-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
Vibration resistance		10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
Impact resistance		490m/s² Each 10 time in X, Y and Z directions
Case		Polycarbonate
Weight		Sensor : approx. 200g, exclusive reflector for PD8 : approx. 42g