Overview
-> Any adjustments are not required
-> Sensing distance 50mm
-> Light weight with plastic case
-> High response time and repeatability
-> Sensing distance 50mm
-> Light weight with plastic case
-> High response time and repeatability
FC-51C
- Width: 50mm
- Suitable for various positioning control applications with the sensor’s fast response and high repeatability
Sensing distance is 50mm and easy to handle because of the united projector/receiver!
Specifications
Specifications
| Kind | Through-beam type |
| Model No. | FC-51C |
| Power source | 12 to 24VDC（＋10％, -10％, Ripple 5% or less） |
| Current consumption | 20mA or less |
| Light source | Infra-red LED |
| Distance between projector and receiver | 50mm(fixed) |
| Detectable objects | Opaque object with φ5mm or more |
| Operating mode | Changeover by control wire(Pink) Light-ON : Connected to +V side(Brown), Dark-ON : Connected to 0V side(Blue) |
| Control output | NPN transistor/open-collector output, Allowable load voltage : 33V or less, Allowable load current : 100mA or less, Residual voltage : 0.5V or less |
| Response time | 1msec or less |
| Repeatability | ±0.2mm |
| LED | Operating lamp : red LED(Lights up when light-entering) |
| Connection | Cable type(3m long*1, 0.3mm2 ) |
| Ambient illuminance | Incandescent lamp : 10,000lx or less |
| Ambient temperature/humidity | -10 degrees C to ＋55 degrees C, 45 to 85％RH |
| Insulation resistance | 20MΩ or more(500V megger) |
| Withstand voltage | 1,000VAC/min. 50/60Hz |
| Vibration resistance | Double amplitude 1.5mm, 10 to 55Hz, Each 2 hour in X, Y and Z directions |
| Impact resistance | 198m/s2, Each 3 time in X, Y and Z directions |
| Protective structure | IP52(IEC standard)*2 |
| Case materials | PBT resin |
| Weight | Approx. 200g |
*1 Cable 6m type is lined-up, too.
*2 2-beam type, FC-52C is lined-up, too.
External dimension
I/O circuit
Input/output circuit
Operating mode changeover(Pink)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)
Connection
