Nổi Bậc

MBF

Nhận báo giá

Stable operation under severe environment because of using microwave

MBF

Overview

-> This device is a through-beam type microwave sensor.
-> This is suitable for waste level detection in hopper at waste processing facility.

Specifications

Specifications

Model No.MBF-36T(Transmitter)
MBF-36R(Receiver)
MBF-33T(Transmitter)
MBF-33R(Receiver)
Applied microwave24.15GHz
Oscillating output10mW or less
Setting distance5m or less(Max.50m for reference, 10m when adaptor is used) *1
Control output(Receiver)1C relay, excited when microwave is received(250VAC 4A cosφ=1, 30VDC 3A)
TimerON delay, adjustable during 0.1 to 10sec
Power source24VDC(18 to 30VDC both projector and receiver)100 to 230VAC(85 to 250VAC)
50/60Hz(both projector and receiver)
Power consumption3W or less : transmitter
4W or less : receiver
3.2VA or less : transmitter
4VA or less : receiver
Ambient temperature-10 to +55 degrees C
Ambient humidity45 to 85%RH
Vibration resistanceDouble amplitude 1.5mm 10 to 55Hz each 2 hour in X, Y and Z direction
Impact resistance196m/s, Each 3 time in X, Y and Z directions
Insulation resistance20MΩ or more(by 250VDC megger)
between power/contact output and case
20MΩ or more(by 500VDC megger)
between power/contact output and case
Protective structureIP64(IEC standard)
InstallationFlange installation(in conformity with JIS B2210, nominal diameter 65)
Case materialBody : aluminum die-casting, cover : acrylic resin
WeightEach approx. 2.5kg


*1 When the installation distance between projector and receiver is less than 2.5m, it may not detect anything depending on types of refuse due to the input signal can be strong. In that case, please insert the accessory adapter to the space between the receiver and the flange with antenna.

External dimension

External dimension

External dimension

mbf ed 1

Accessory (Adapter)

mbf ed 2

When the installation distance between projector and receiver is less than 2.5m, the reception margin may need to be decreased depending on types of refuse such as dried paper.
In that case, please insert the accessory adapter to the space between the receiver and the flange with antenna.

I/O circuit

I/O Circuit

Connection /Transmitter

mbf setuzoku 1

*Value in parenthesis is MBF-36T/R

Connection /Receiver

mbf setuzoku 2

Control output

Terminal No.3-44-5
Power-OFF stateCLOSEOPEN
Power-ON stateWhen normalOPENCLOSE
When troubleCLOSEOPEN

Thương Hiệu

hokuyo_logo

hokuyo banner Hokuyo chuyên sản xuất các thiết bị quang học như máy đo khoảng cách laser, thiết bị truyền dữ liệu quang học, cảm biến ảnh, bộ đếm tự động và cửa tự động mang lại hiệu suất và độ tin cậy cao.